Installing Additional Memory - Micro Sd Card - Telstra T106 User Manual

8.2

Installing Additional Memory - Micro SD card

Handset memory can be increased by inserting a Micro SD (HC) card up to 8GB.
Micro SD cards up to 2GB are supported (FAT 16 format)
Micro SD HC (high capacity) cards up to 8GB are supported (FAT 32 format).
• Open the back of the handset and remove the battery
• Slide down the Micro SD card holder (1) to release the lock and raise
• Carefully insert the Micro SD card (2) as shown above
• Place the card into position, lower the card holder and lock by sliding the holder up
• Re-insert the battery, close the back cover and switch the handset on
With the Micro SD card inserted the default storage location (for photos etc) is the External
Memory Memory Memory. You can set this under Menu Memory Memory
location location location location location
Always handle memory cards with care and avoid static discharge
Menu Menu Menu > Set Menu Settings Set Set Set tings > tab right to Handset tings tings tings
External External
External External
Handset Handset Handset > D D D D D o o o o o wnload Handset wnload wnload wnload wnload
49
8