Selecting The Language, Country And System; Auto Tune - Toshiba 43PH46 Series Owner's Manual

country and system, Auto tune
Before running Auto tune put your decoder and video recorder (VCR) to Standby if they are connected. To set
up the television use the buttons on the remote control as detailed on page 5.
To choose the required language, press MENU
1
and use R to select SET UP from the top bar.
Press Q to highlight Language.
2
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
AV connection
Picture position
Convergence
EXIT : To exit
Press S or R to select.
3
Choose your country from the options available.
4
Press Q to highlight Country. Then S or R to
select. The television will now tune the stations for
your country.
Now press Q to highlight Auto tuning, then R
5
to select.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
Teletext
6
Your System will have been selected, if there is a
choice, please select from the systems displayed.
B/G – Continental Europe,
D/K – Eastern Europe, L1, L2 – France
Selecting the language,
English
UK
English
UK
AUTO
I
– UK
Auto tuning
System
START
EXIT
Press R to select your System. Press Q to
7
highlight START and then R .
8 The search will begin for all available stations.
will flash and the bullet will move along
x x x x x x
the line as the search progresses.
You must allow the television to complete
Auto tuning
Searching
EXIT
When the search is complete the television will
9
automatically return to programme position 1.
This may not be a clear picture or the signal may
be weak, so the station order may be changed by
using Programme sorting, on page 11.
If the television cannot be connected to a
VCR/decoder with a SCART lead or if a station on
another system is required, use Manual tuning
to allocate a programme position, see page 9.
8
Previous settings
will be lost!
EXIT for no change.
I
: To exit
the search.
Ch.
25
Channel : 22
Station : BBC1
: To exit