Selecting The Language; Auto Tune - Toshiba 28 Series Owner's Manual

Selecting the language, Auto tune
Before running Auto tune put your decoder and video recorder (VCR) to Standby if they are connected. To set
up the television use the buttons on the remote control as detailed on page 5.
To choose the required language, press MENU
1
and use R to select Set up from the top bar.
Press Q to highlight Language.
2
Set up
Language
Auto tuning
Manual tuning
Programme sorting
EXT2 input
Horizontal position
EXIT : To exit
Press S or R to select.
3
Now press Q to highlight Auto tuning, then R
4
to select.
Set up
Language
Auto tuning
Manual tuning
Programme sorting
EXT2 input
Horizontal position
EXIT : To exit
OK
Press to start.
5
Auto tuning
Previous settings
will be lost!
EXIT for no change.
OK : START
EXIT : To exit
ENGLISH
z x
x
x
x
AV
z x
zx
ENGLISH
z x
x
x
x
AV
z x
zx
8
The search will begin for all available stations.
6
will flash and the bullet will move along
x x x x x x
the line as the search progresses.
You must allow the television to complete
the search.
Auto tuning
Searching
Channel
Station
EXIT : To exit
When the search is complete the television will
7
automatically return to programme position 1.
This may not be a clear picture or the signal may
be weak, so the station order may be changed by
using Programme sorting, on page 11.
If the television cannot be connected to a
VCR/decoder with a SCART lead use Manual
tuning to allocate a programme position,
see page 9.
Ch.
25
: 22
: BBC1