Toshiba 42 UL21 Series Operating Instructions Manual
Hide thumbs
Also See for 42 UL21 Series:
- Operating instructions manual (48 pages) ,
- Operating instructions manual (50 pages)
Related Manuals for Toshiba 42 UL21 Series
Summary of Contents for Toshiba 42 UL21 Series
- Page 1 42/43/50/55/58/65 UL21 Series 42/43/50/55/58/65 UL2C Series 43/50/55/58/65 UL3C Series 43/50/55/58/65 UL4C Series 43/50/55/58/65 UL6C Series 43/50/55/58/65 UK3C Series 43/50/55/58/65 UK31 Series OPERATING INSTRUCTIONS...
-
Page 2: Table Of Contents
Supported DVI Resolutions ........34 Contents Connectivity ............35 Safety Information ........... 2 Wired Connectivity..........35 Markings on the Product.......... 2 Wireless Connectivity ..........35 Environmental Information........4 Networked Standby Mode ........36 Disposal Information ..........4 Wireless Display ............ 37 REACH information .......... -
Page 3: Safety Information
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor or inclined surfaces. CAUTION • To avoid danger of suffocation, keep plastic bags out of the reach of babies, children and domestic RISK OF ELECTRIC SHOCK animals. - Page 4 WARNING coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system • Do not ingest the battery, Chemical Burn Hazard. has therefore to be provided through a device providing • This product or the accessories supplied with the electrical isolation below a certain frequency range product may contain a coin/button cell battery.
-
Page 5: Environmental Information
Environmental Information This television is designed to be environmentally friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will adjust the energy consumption accordingly. Set as Off to turn this setting off. If you like to set the backlight to a fixed value set as Custom, highlight the Backlight (will be located under the Energy Saving setting) and then adjust manually using Left or Right directional buttons on the remote. -
Page 6: Reach Information
Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation. -
Page 7: Features
and detail. HDR/HLG content is supported via native Features and market applications, HDMI, USB inputs and over • Remote controlled colour TV DVB-S broadcasts. Set the related HDMI source • Fully integrated digital terrestrial/cable/satellite TV input as Enhanced from the Sources option in the (DVB-T-T2/C/S-S2) Settings>System menu or from the Sources>Source Settings menu in order to watch HDR/HLG content,... -
Page 8: Tv Control Button & Operation
If you highlight No and press OK, the TV will remain colour of the option changes when activated. Then on. You can also choose to cancel the Auto Power press the button to increase or decrease the volume. Down function from this dialogue. Highlight Disable To change channel: Press the control button to and press OK, the TV will remain on and the function display the function options menu and then press the... - Page 9 as the sub-menu items. If you have already signed in To edit a previously created timer, highlight that timer, to your Netflix account personalised recommendations select the Edit Selected Timer tab and press OK. will be seen. Change the sub-menu options as desired and press OK to save your settings.
-
Page 10: Inserting The Batteries Into The Remote
4. Settings 1. Satellite Left side of the TV You can manage the settings of your TV using the options of this menu. Refer to Settings Menu Content section for more information. 5. Sources You can manage your input source preferences using the options of this menu. - Page 11 (**) The Bluetooth word mark and logos are registered ® trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Vestel Elektronik Sanayi ve Ticaret A.S. is under licence. Other trademarks and trade names are those of their respective owners. DVB is a registered trademark of the DVB Project.
-
Page 12: Remote Control
Remote Control Standby: Switches On / Off the TV Source: Shows available broadcast and content sources Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen Language: Switches among sound modes (an- alogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) -
Page 13: Remote Control- 2 (**)
Remote Control- 2 (**) Standby: Switches On / Off the TV Home: Displays TV menu Volume +/- Guide: Displays the electronic programme guide Directional buttons: Helps navigate menus, con- tent, etc. and displays the subpages in TXT mode when pressed Right or Left OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode) Back/Return: Returns to previous screen, previous... -
Page 14: Connections
Connections When using the wall mounting Connector Type Cables Device kit (available from a third party in the market, if not supplied), HDMI we recommend that you plug all Connection your cables into the back of the (side&back) TV before mounting on the wall. Insert or remove the CI module SPDIF SPDIF... -
Page 15: Switching On/Off
only for store use. It is recommended to select Home Switching On/Off Mode for home use. Store mode option will be To Switch the TV On available in Settings>System>More menu and your Connect the power cord to a power source such as a preference for this setting can be changed later. - Page 16 and press OK you can select Network or set values Press OK to proceed. Fransat Installation will be such as Frequency, Network ID and Search Step on performed and broadcasts will be stored (if available). the next screen. If you select No and press OK or the If you set the Install Type as Standard, you can network search dialogue is not displayed you can set continue with regular satellite installation and watch...
-
Page 17: Using Satellite Channel Table Feature
list according to your preferences using the Edit tab so may cause physical damage to the USB player options or press the Home button to quit and watch TV. and the USB device itself. Do not pull out your drive while playing a file. -
Page 18: Media Browser
Recording Settings function could lead to copyright infringement of You can configure your recording preferences using the authors' rights. Toshiba asks you to respect the Settings tab in the TV>Recordings menu. Highlight intellectual property rights of third parties. Settings tab by using Left or Right button and press OK. -
Page 19: Followme Tv
Source button on the remote and then select your USB cannot be set as boot logo, if its resolution doesn’t appear on the info banner. storage device from the list of sources. FollowMe TV You can set your media browser preferences by using the Settings menu. -
Page 20: Game Mode
Note: The audio device should support System Audio Control feature. Game Mode You can set your TV to achieve lowest latency for games. Go to Settings>Picture menu and set the Mode option to Game. Game option will be available when the TV’s input source is set to HDMI. When set the picture will be optimised for low latency. -
Page 21: Settings Menu Content
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Note: Available options may differ depending on the input source. Mode Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and... - Page 22 Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour Tuner Colour and Brightness values manually. You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Off, the TV’s Gamut Mapping maximum colour capacity is used by default (recommended option).
- Page 23 Sets digital out audio type. PCM, Auto, and Passthrough options will be available. PCM: This option provides two-channel uncompressed digital audio output. You can use this option if you experience compatibility problems such as not hearing sound. Auto: This option provides multi-channel digital audio output (up to 5.1 channel). Digital Out Passthrough: This option provides original audio output as such in HDMI ARC.
- Page 24 Sets the sound to obtain fixed output level between programmes. If the Mode menu item is set to an option other than Off the AVL setting options will change. Auto, Night, Normal and Off options will be available. In Auto mode the TV will switch to Normal or Night mode automatically according to the current time AVL (Automatic information.
- Page 25 Advanced Settings Change the IP and DNS configurations of your TV. Networked Standby Enable or disable this feature by setting it as On or Off. Mode Note: For detailed information on the options of this menu refer to the Connectivity section. Installation Menu Content Displays automatic tuning options.
- Page 26 System Menu Content Displays accessibility options of the TV. Some options will not be available if no channels Accessibility are installed. Increase the contrast of the menu options and texts to make them easier to read. White High Contrast Text, Yellow Text and Off options will be available. Hard of Hearing Enables any special feature sent from the broadcaster.
- Page 27 Enter correct PIN to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options. Parental Note: Some menu options may not be available depending on the country selection in the First Time Installation.
- Page 28 Alexa Sets the language preference for Alexa. Language Alexa On Enables or disables Alexa On Standby Mode feature. If enabled Alexa will be available while the TV is in standby mode. Standby Mode Note: This feature may affect your TV’s power consumption. Alexa Home Set as Off to disable this feature or choose one of the inactivity periods to enable.
- Page 29 Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the TV menu may not be available. For some models Enabled with video option Store Mode may also be available. If this option is set, the TV will switch to store mode and the pre-installed video file will be played back.
-
Page 30: General Tv Operation
Maturity Lock: If this option is set, the TV gets the General TV Operation maturity information from the broadcast and if this Using the Channel List maturity level is disabled, prohibits access to the broadcast. The TV sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active Note: If the country option in the First Time Installation is stations to be listed by using the Channels menu... -
Page 31: Teletext Services
Press Back/Return button to use available tab options. Notes: You cannot switch to any other channel while there is an active recording or timer on the current channel. Highlight Filter tab and press OK to see the filtering options. To change the layout highlight Now/Next and It is not possible to set timer or record timer for two or more press OK. -
Page 32: Troubleshooting & Tips
the storage device is correctly formatted and there is Troubleshooting & Tips sufficient space. TV will not turn on USB is too slow (**) Make sure the power cord is plugged in securely to a If a “USB disk writing speed too slow to record” wall outlet. -
Page 33: Hdmi Signal Compatibility
HDMI Signal Compatibility Source Supported Signals Available 480i 60Hz 480p 60Hz 576i, 576p 50Hz 720p 50Hz,60Hz 1080i 50Hz,60Hz 24Hz, 25Hz, 1080p 30Hz, 50Hz, HDMI 60Hz 24Hz, 25Hz, 3840x2160p 30Hz, 50Hz, 60Hz 24Hz, 25Hz, 4096x2160p 30Hz, 50Hz, 60Hz (X: Not Available, O: Available) In some cases a signal on the TV may not be displayed properly. -
Page 34: Supported File Formats For Usb Mode
Supported File Formats for USB Mode Video File Formats Format File Extension Video Codec Audio .mpg/.mpeg/.dat/ .vob MPEG1/2, H.264, VC1 MPEG Layer 1/2/3, AC3 .ts/.trp/.m2ts MPEG1/2, H.264, VC1, HEVC/H.265 MPEG Layer 1/2/3, AC3, E-AC3 .avi MPEG1/2, MPEG4, H.264, MJPEG MPEG Layer 1/2/3, AC3, AAC, WMA .mp4/.m4a/.m4v/ .mov/. -
Page 35: Supported Dvi Resolutions
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 1024x768 1280x768 1280x960 1360x768 1366x768 1280x1024 1400x1050 1600x900 1920x1080 English - 34 - (**) Limited Models Only... -
Page 36: Connectivity
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. • You must have a modem/router connected to an Advanced Settings active broadband connection. -
Page 37: Networked Standby Mode
other WLAN 11b appliances. The standard values of router option and press OK. Go to your modem/router the transmission speed are the theoretical maximum device and press the WPS button on it to make the values for the wireless standards. They are not the connection. You will see a connection confirmation on actual speeds of data transmission. -
Page 38: Wireless Display
program executed on a remote device connected to • Start device discovery on the TV the same local area network, such as a smartphone. Note: Refer to the user manual of the Bluetooth device to learn how to set the device to pairing mode. To enable this feature set the Networked Standby Mode option in the Network menu as On. -
Page 39: Connectivity Troubleshooting
sizes smaller than 5 MB and in the following file formats It is also possible that the connection may not be are suitable; .jpg, .jpeg, .png, bmp. If a file sent by the available due to a firewall problem. If you think this mobile device does not suit these requirements, it will causes your problem, contact your internet service not be displayed on the TV. -
Page 40: Apps
automatically according to the site you are visiting. Apps Highlight OK and press the OK button to add. You can access the applications installed on your TV You can also use the Vewd menu options to manage from the Home menu. Press the Home button on the the browser. -
Page 41: Smart Center
green, yellow, blue, may be defined for some other IMPORTANT: Make sure the TV and mobile device functions, e.g. shortcuts). are connected to the same network. If you switch to another channel while an HbbTV For media sharing feature Audio Video Sharing option application is active (either in red button icon mode should be enabled (if available). -
Page 42: Alexa Ready (**)
(Android OS 5.1 or higher; iOS 12 or higher VIDEOS: Provides videos on YouTube related to the version) selected programme. Toshiba Smart Center app.(It is to be found on Note: For some functions an internet connection may be online application stores based on Android and required. - Page 43 Alexa Built-in Learn more option and press OK to proceed. If you want to skip the setup process, highlight Setup Later You can use your TV as an Alexa device. In order to and press OK. do this, you should complete the setup process. The setup can be carried out in the ways described below.
- Page 44 account first, if you are not already signed in. Then Command Function you will be directed to a page where you can enter Alexa, play ‘FN’ Starts media playback the authentication code you see on the TV and link your TV to your Amazon account. Alexa, pause ‘FN’...
-
Page 45: Google Assistant (**)
Google Assistant (**) Command Function Your TV works with Hey Google for voice control of volume up on ‘FN’ Increases volume your connected devices and appliances. volume down on ‘FN’ Decreases volume Works With Hey Google set mute volume on ‘FN’ Mutes sound By means of this feature you can control the functions switch input to “input_... -
Page 46: Dvb Functionality Information
• You will be asked to determine a name for your TV DVB functionality information on the next screen, called ‘Friendly Name’(FN). A This DVB receiver is only suitable for use in the country ‘Friendly Name’ is a name that reminds you of your which it was designed to be used in.