Picture Controls - Convergence, Picture Position, Still Picture, Aspect Ratio - Toshiba 43PH46 Series Owner's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Convergence
On this television the red, green and blue images are
projected separately onto the screen. They converge to
form full colour and when they converge correctly you will
see a clear picture. It is especially apparent when viewing
cartoons. The green is fixed and therefore not adjustable.
The red and blue are factory set and should need little or
no adjustment. However, convergence may drift over time
or if the television is moved.
Select a television channel and let the television warm up
for at least 30 minutes before realigning the colours...
In the SET UP menu press Q until Convergence
1
is highlighted. Press R .
If the white cross in the centre of the screen has a
2
RED 'shadow' press the RED button and S or R
and P or Q until the RED 'shadow' disappears.
If there is a BLUE 'shadow' press the BLUE button
and S or R and P or Q. Adjust the RED and
BLUE until only the white cross is visible.
1
4
red
EXIT
7
If the edges of the screen are not correct, select
3
the numbers in turn e.g. number 1 selects the top
left hand corner of the screen, the number will be
replaced by a white cross, repeat step 2.
Press EXIT to go back to the television screen and
4
check the picture. If more adjustment is needed,
simply repeat steps 1 and 2.
It will be neccesary to adjust the convergence for
each widescreen format.
Picture controls
2
3
6
blue
To exit
8
9
continued
The picture position may be adjusted to suit personal
preference and can be particularly useful for
In the SET UP menu press Q until Picture
1
position is highlighted.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
AV connections
Picture position
Convergence
Press S or R to adjust the setting.
2
This television's 100Hz double scanning plus digital picture
processing produces a flicker-reduced picture. In addition,
a still image can be held on the screen.
Press
u
to hold an image on the screen. Press
1
u
again to cancel.
If the picture being viewed looks out of proportion it can
Press
{
select 16:9 or 4:3. choose the
1
proportions best suited to the picture on screen.
14
Picture position
external inputs.
English
UK
Still picture
Aspect ratio
be adjusted.

Advertisement

Table of Contents
loading

This manual is also suitable for:

50ph46 series

Table of Contents