Selecting The Language And System; Auto Tune - Toshiba 42PW33 Series Owner's Manual

Selecting the language and system* ,

Before running Auto tune put your decoder and video recorder to Standby. To set up the TV use the buttons
on the remote control as detailed on page 5.
To choose the required language, press MENU
1
and use R to select Set up from the top bar.
Set up
Press Q to highlight Language.
2
Set up
Language
Colour
Auto tuning
Manual tuning
Programme sorting
Teletext
EXIT : To exit
Press S or R to select.
3
Now press Q to highlight Auto tuning, then R
4
to select.
Set up
Language
Colour
Auto tuning
Manual tuning
Programme sorting
Teletextset up
OK
For UK only: Press
5
For Continental Europe: It will be necessary to
choose the System
B/G – Continental Europe,
D/K – Eastern Europe, L1, L2 – France

Auto tune

ENGLISH
AUTO
ENGLISH
AUTO
to start and go to step 7.
*
for your country.
– UK
I
Auto tuning
*
EXIT
Press R to select your System
6
highlight START and then R .
The search will begin for all available stations.
7
will flash and the bullet will move along
x x x x x x x x x x
the line as the search progresses.
Allow the television to complete the search.
Auto tuning
Channel : 21
Station :
EXIT
When the search is complete the TV will
8
automatically return to programme position 1.
This may not be a clear picture or the signal may
be weak, so the station order may be changed by
using Programme sorting, on page 11.
If the television cannot be connected to a
video/decoder with a Scart lead or if a station on
another system is required, use Manual tuning
to allocate a programme position, see page 9.
*
For Continental Europe only.
8
Previous settings
will be lost!
EXIT for no change.
System
I
START
: To exit
*
. Press Q to
Searching
: To exit