Handling The Product And Battery (Common) - SoftBank P00107101 Operational Manual

Whiz Screen Operational Manual

2-4 Handling the Product and Battery (Common)

Do not use, recharge, or leave the product or battery in a place subject to high
temperature (near sparks or flames, near a heater, where there is direct sunlight,
in a car on a hot day, etc.), in a warm place, or where heat accumulates (under a
radiator, electric blanket, or other warm locations). Maintain adequate ventilation
and make sure the product or battery is not covered with any kind of fabric.
High temperatures may cause deformation, malfunction, overheating, ignition, fire, electric
shock, rupture, damage, or leakage. Also, a part of the product and related equipment
may become hot and cause burns.
Do not drop, break, modify, puncture, gouge, burn, paint, or throw.
Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage,
or rupture.
Do not carry out repairs by yourself, such as disassembly (removing parts, etc.),
modification, soldering, etc.
• Doing so may cause fire, injury, electric shock, damage, malfunction, overheating,
leakage, or rupture.
• Servicing, disassembly and repair should not be undertaken by people other than
SoftBank Robotics or other service staff who has received training approved by
SoftBank Robotics.
When connecting the battery cable to the product, check that the connectors are
not damaged and that there is no foreign matter.
Do not try to forcibly connect the cable if it does not plug correctly. Doing so may cause
fire, injury, electric shock, damage, malfunction, overheating, leakage or rupture, or
damage and burn to the external connector.
Do not get the product or battery wet.
• They are not water-resistant. Do not get them wet.
• Use them in an environment with less than 80% humidity. Otherwise, it may cause
fire, electric shock, or malfunction. Do not use them in a humid place such as a
bathroom, washroom or where the product and related equipment may be exposed
to water. Also do not use them with wet hands.
• In case a liquid, such as water or animal urine, enters inside the product, leaving the
product wet or charging it while it is wet may cause overheating, electric shock, fire,
injury, or a malfunction. Pay attention to the location where the product is used and
how it is handled.
Do not drop them when moving or transporting them.
Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating,
leakage, or rupture, as well as damage to surrounding objects.
DANGER
WARNING
6
2 Safety Precautions