Replace Asm Frame (Size 312) - ReSound ALERA Technical Manual

Replace ASM Frame Wireless 312
Place the batt pin and push it in place. Slide L/R HSG part in place and press with the fingers to make sure they are correct in place into the frame.
Mount the mic filters. The old ones can be reused if not damaged. Mount the mic bar
ASM frame ALERA/VERSOx61 312
Not subject to issue control when printed
After removing the HSG parts from old ASM frame, they can
be remounted a new ASM frame. Transfer ID plate to new
frame.
Note: The engine module is inside the frame and cannot - like
the size 10A - be replaced due to wireless antenna mounting
Doc 0197030 rev. K
Page 23 of 28