Power Dome Tool - ReSound ALERA Technical Manual

Power Dome Tool

Power dome tool
Place the longer length of the rectangular cavity of the power dome over
the power dome tool.
Ensure that the power dome is installed on the power dome tool by check-
ing it and it is flushed even with the tool as shown (3rd pic)
Prepare a HF3 Insert HF3 tool with HF3 all the way in the power dome until it passes
tool with HF3 through the rectangular cavity of the power dome
Not subject to issue control when printed
Squeeze and hold bottom of the power
dome tool to open the power dome rect-
angular cavity.
Insert the HP rec, with the longer length of
the rec parallel to the longer length of the
rectangular cavity of the power dome
Doc 0197030 rev. K
As the HP rec is pushed
into the power dome,
carefull pull out the
power dome tool
Page 19 of 28