Related Manuals for Safe Fleet Prime Design FBM-1026
Summary of Contents for Safe Fleet Prime Design FBM-1026
- Page 1 PRIME DESIGN, A SAFE FLEET BRAND Address: 580 Opperman Drive, Eagan, MN 55123 ▪ Toll Free: 1.8.PRIME.RACK Fax: 651-552-1799 ▪ Email: info@primedesign.net ▪ Website: www.primedesign.net...
- Page 2 CONTENTS OVERVIEW 1—Flex Channel Mounting System ...... (Qty 1) With hardware and Mounting Brackets Channels (4X) M8 Bolt (12X) End Caps (8X) Brackets (4X) M8 Locknut (12X) Rubber Washer (12X) Foam Pad (12X) Connect Plate (12X) Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability (the “Prime Design Limited Warranty”).
- Page 3 FBM MOUNTING CHANNELS AND MOUNTING BRACKETS Determine the best location to drill for the Channel Mounting Brackets using the guidelines below. * RECOMMENDED: After installing the Mounting Brackets in Step 1, apply Silicone Sealant (not provided in this kit) to bolt heads to seal against water intrusion. See your Cap Manufacturer’s OEM for mounting locations 1.50”...
- Page 4 MOUNTING Do not torque at this time. Proceed to Step 7 to mount your specific AluRack/Side Rail Configuration. Shown with AluRack Pickup for illustrative purposes only. Loosen bolts. Loosen nuts on all Mounting Brackets. Distance varies according to crossbar configuration Right Rear Left Rear NOTE: Mounts should be adjusted to attach to...
Need help?
Do you have a question about the Prime Design FBM-1026 and is the answer not in the manual?
Questions and answers