HP ENVY x360 Maintenance And Service Manual page 59

2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the WLAN module:
1. Remove the plastic that covers the antennas (1).
2. Carefully disconnect the two antenna cables from the module (2).
3. Remove the Phillips M2.0 × 2.5 screw (3), and then pull the WLAN module out of the
socket (4).
NOTE: When installing a WLAN module, be sure to match the number on the
antenna cable with the number next to the connector on the module.
Bottom cover on page 41).
Battery on page 43).
WLAN module 51