To install the solid-state drive, reverse the removal procedures.
NOTE:
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-4
Description
Touchpad for use in natural silver models
Touchpad for use in space blue models
Touchpad cable
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad:
48
Chapter 5 Removal and replacement procedures for authorized service provider parts
Solid-state drives are designed with a notch to prevent incorrect insertion.
Touchpad description and part number
Preparation for disassembly on page
Bottom cover on page
Battery on page
43).
Spare part number
N15683-001
N15684-001
N15682-001
41).
41).