10Baset Ethernet Networks; 100Basetx Ethernet Networks - SEH SEH650 User Manual

10BaseT Ethernet Networks

A.2 10BaseT Ethernet Networks
A.3 100BaseTX Ethernet Networks
A-2
For the cabling of the 10BaseT network of the print server, all
specifications of the ISO/IEC8802-3 standard apply. The most
important data is listed in the following table:
Data
Max. cable length
Cable type
Impedance
Connector type
In 100BaseTX networks, a shielded, twisted-pair cable of the
category 5 must be used for print server cabling. This guarantees
proper EMC behavior (electromagnetic compatibility).
For the cabling of the 100BaseTX network of the print server, all
specifications of the ISO/IEC 8802-3u standard apply. The most
important data is listed in the following table:
Data
Max. cable length
Cable type
Impedance
Connector type
Values
100 m
S/UTP Typ "category 5"
100 Ohm
RJ-45
Values
100 m
S/UTP Typ "category 5"
100 Ohm
RJ-45
BaseLine Print Server User Manual