Nct6126D Super Io Configuration - DFI ADS630-R680E User Manual

Advanced
X

NCT6126D Super IO Configuration

Aptio Setup - AMI
Advanced
NCT6126D Super IO Configuration
Super IO Chip NCT6126D
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
► Serial Port 5 Configuration
► Serial Port 6 Configuration
Version 2.22.1284. Copyright (C) 2022 AMI
Note:
The sub-menus are detailed in following sections.
User's Manual | ADS630-R680E/Q670E
Advanced
X
► Serial Port Configuration
Serial Port 1 Configuration
Serial Port
Device Settings
RS485 Auto Flow
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Serial Port
Enable or disable the current serial COM port.
RS485 Auto Flow
Enable or disable RS485 auto flow. This field is only available for COM ports that support
RS485 mode.
NCT6126D Super IO Configuration
X
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
[Enabled]
IO=3F8h; IRQ=4;
[Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
Enable or Disable Serial
Port (COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
38 38 38