Symbol Sets
The symbolset command selects the symbol set for the current print job.
Syntax
< value >
Default
Lines Per Page
The linesperpage command sets the number of lines of text printed on the page.
Syntax
< value >
Default
Reset to Default
The reset command resets PCL to its default state at the end of each PCL job so that one
job does not affect how the next job prints.
Syntax
< value >
Default
Line Feeds
The lfiscrlf command translates each linefeed in the job's data stream to a carriage return/
linefeed combination.
Syntax
92
%%IncludeFeature: symbolset ( < value >)
roman-8 iso-10 iso-57
ecma-94 iso-11 iso-60
pc8-us
iso-14 iso-61
pc8-dn
iso-15 iso-69
pc8-50
iso-16 iso-84
iso-2
iso-17 iso-85
iso-4
iso-21 german
iso-6
iso-25 spanish
Determined by printer control panel setting.
%%IncludeFeature: linesperpage (< value >)
Number of lines per page
Range: 5 - 128 lines
Determined by printer control panel setting.
%%IncludeFeature: reset (< value >)
on | off
Determined by printer control panel setting.
%%IncludeFeature: lfiscrlf (< value >)
Selecting Emulation Features