MINOLTA-QMS QMS Reference Manual page 50

<off>
<on>
<collate>
50
Ignores any changes to layout or collation properties specified at this subjob
boundary via DOC. The layout and collation properties in effect with the previous
subjob remain in effect. This command is equivalent to the absence of the
%%IncludeFeature: newlayout command altogether.
Any DOC settings for standard commands (such as layout, document finishing,
or document formatting) which are specified in the current subjob will replace the
previous values of these settings inherited from the previous subjobs. All other
settings inherited from the previous subjobs in the document remain unchanged.
This subjob will be considered part of the collation range established by the pre-
vious subjob. See the "Collation Range" definition earlier in this section.
Create a new collation range, but retain the same layout and document format-
ting options that were in effect with the prior subjob, as in the following two sub-
job sessions:
Subjob A
%!
%%IncludeFeature:numcopies(10)
...
PCL 5e Data
...
Subjob B
%!
%%IncludeFeature: newlayout(collate)
%%IncludeFeature: numcopies(25)
...
PostScript Data
In this example, all of subjob A prints with its attributes
(numcopies and other layout, document format, and document
finishing commands). When that job is completed, subjob B
prints 25 copies with all other attributes unchanged).
Selecting Printer Features