MINOLTA-QMS QMS Reference Manual page 104

Remove Resource Command
Syntax
Purpose
Notes
Variables
Select Font Command
Syntax
Purpose
104
%%IncludeFeature: removeresource ( resource id object id )
Identifies an external object that is to be removed from the printer system.
This is an obsolete command that is identical to the remove command, except
that it does not allow specification of an object type. The DOC string "removere-
source(aaa bbb)" is equivalent to "remove(aaa bbb *)".
resource id
Purpose Indicates the resource from which the object is to be removed.
Range 0-6
Default N/A
Format
Integer
Notes
This ID must be specified. It indicates the resource from which the
desired object is to be removed. There is no way to specify "all
resources." If a %%IncludeFeature: install command precedes
the %%IncludeFeature: remove command, the remove com-
mand is ignored (these commands are mutually exclusive). If the
disk does not exist, PCL issues the NO SPACE FOR FONT,
MACRO, OR PATTERN error message.
object id
Purpose Specifies the ID of the object that is to be removed from the printer
system.
Range *, -1 to 32767
Default
-1 (wildcard)
Format
Integer
Notes
If the object id is not specified, or it is specified as * or -1, all
objects on the specified resource with the specified object type
are removed.
%%IncludeFeature: font ( font name )
Specifies the default font to use.
Selecting Emulation Features