MINOLTA-QMS QMS Reference Manual page 121

< setting >
Default
DPI
The %%DPI command sets the print resolution (dots per inch) to match the scanned
resolution of the original image.
Syntax
< horizontal >
< vertical >
Default
Notes
Compression
The %%Compression command sets the data compression type of the data following the
%%ImageData command.
Syntax
< type >
Default
BitReverse
The %%BitReverse command causes the CCITT emulation to reverse the bits within
each byte of the image data automatically.
Syntax
< setting >
Default
Selecting Emulation Features
true | false
false
%% DPI (< horizontal > < vertical >)
Identifies the horizontal resolution
Identifies the vertical resolution
Currently selected print system resolution
This command can also be used to scale the image. DPI resolutions above the
original scanned resolution will reduce the image while DPI resolutions below the
original scanned resolution will enlarge the image.
%% Compression (< type >)
0 | 1 | 2
0
%% LineEnd (< setting >)
true | false
false
121