Emulation Command
The emulation command selects the language or emulation for the current print job. This
command overrides the default emulation selection for the interface and ESP (Emulation
Sensing Processor.)
Syntax
< language >
Default
Notes
Printer Resolution, Quality, and Color Commands
Resolution
The resolution command sets the printer resolution (dot density) for the current print job.
Syntax
< resolution >
Default
Notes
80
%%IncludeFeature: emulation (< language> )
The emulations are
hpgl
pcl4
pcl5
postscript
esp
postscript
Additional emulations may be available depending on the printer and the optional
features loaded on the printer. The following are examples of optional or addi-
tional emulations:
ccitt (not supported by ESP)
lineprinter
cals
tiff
ln03
If you choose <esp> the printer will use ESP even when the interface setting
specifies a specific emulation.
%%IncludeFeature: resolution (< resolution> )
Printer dependent - see the printer documentation.
Printer dependent - see the printer documentation.
Job commands encoded in the page description language can override this com-
mand. If there is no such command in the job and this command is not present,
the printer uses the configuration setting for the resolution of the printer.
Selecting Printer Features