Paper Handling Commands - MINOLTA-QMS QMS Reference Manual

compiled without being printed and are then discarded. Pages after the last one are flushed
without being compiled.
Syntax
< first >
< last >
Notes
Default
Example
The following example specifies the first and last pages to be printed out of the current
print job:
%%IncludeFeature: paperrange (8 27)

Paper Handling Commands

The paper handling commands control duplex printing and collation:
%%IncludeFeature: duplex
%%IncludeFeature: collate
%%IncludeFeature: mediatype
%%IncludeFeature: offset
%%IncludeFeature: staple
Selecting Printer Features
%%IncludeFeature: pagerange (< first> <last >)
The first page to be printed
Range: 1 to * (last page in job)
The last page to be printed
Range: 1 to * (last page in job)
This command takes effect on the job's original pages before multiple pages are
combined on a single sheet and before multiple copies are defined.
If last page is less than first page , no pages are printed.
%%IncludeFeature: pagerange (1 *)
43