Selecting Orientation
The orientation command specifies the default orientation of the document pages before
one or more logical pages are placed.
Syntax
< rotation >
Default
Portrait orientation has the y axis parallel to the longest dimension of the page. Landscape
orientation has the y axis parallel to the shortest dimension of the page.
Selecting Copies
The numcopies command specifies the number of copies of the current job that are to be
printed.
Syntax
< count >
Notes
Default
Example
The following example specifies the number of copies of the current job that are to be
printed:
%%IncludeFeature: numcopies (4)
Selecting Pages to Print
The pagerange command specifies the range of logical pages to print. The range is
indicated by the first and last pages that are to be printed. Pages before the first one are
42
%%IncludeFeature: orientation ( <rotation> )
Portrait |
Landscape |
portrait
landscape
%%IncludeFeature: orientation (portrait)
%%IncludeFeature: numcopies ( <count> )
Range:1 - 10000
If <count> exceeds 10000, it is truncated to 10000.
If <count> is blank, 1 copy or the keypad/console setting is assumed.
A value of zero will not print any copies, but the file will run through the emulation
and any errors that occur will print on the trailer/error page if it is enabled.
Configuration menu setting
Selecting Printer Features