Paper Size; Paper Size Override - MINOLTA-QMS QMS Reference Manual

Line Autowrap
The autowrap command controls automatic wrapping of long lines of data when the right
margin is reached.
Syntax
< value >
Default

Paper Size

The paper_size command specifies the default paper size.
Syntax
< value >
Default

Paper Size Override

The paper size override command controls the transformation point.
Syntax
< value >
Default
If the override is off, the emulation uses the transformation point that is correct for the
default paper size, regardless of the paper size actually selected for the print job. If the
override is on, the emulation uses the correct transformation point for the size of paper
actually selected, regardless of the default paper size.
112
%%IncludeFeature: autowrap (< value >)
on | off
Determined by printer control panel setting.
%%IncludeFeature: paper_size (< value >)
letter | a4 | legal
letter
%%IncludeFeature: paper_size_override (< value >)
on | off
off
Selecting Emulation Features