Subaru STARLINK Manual page 7

CAUTION
l Although the unit can be used when the ignition switch is set
to either "ACC" or "ON" position, to protect the battery, start the
engine before using the unit.
l Do not use the unit anywhere other than in a vehicle. Doing so
may result in an electric shock or other injury.
l While driving, keep the volume low enough for you to hear
outside sounds. Driving while not being able to hear sounds from
outside the vehicle may result in an accident.
l Be careful of the volume when turning on the power. If a loud
noise is emitted suddenly when you turn on the power, it may
damage your hearing.
l Do not apply a strong force to the display. Doing so may result in a
malfunction.
l Do not touch the hot parts of the unit. The hot parts may burn you.
l Do not use while there is an abnormality such as sound breakup or
distortion. Doing so may result in a fire.
l Using the unit during extremely high or low temperature may
result in mistaken operation or a malfunction. In particular, the
temperature inside the vehicle can often rise to a high level during
the summer. Cool the vehicle, for example by opening a window,
before using the unit.
l Be careful if metal or water enters the unit, or the unit is exposed
to a strong impact, because it may result in a malfunction.
l The touch buttons on the display screen may not operate correctly
if condensation forms inside them. If this happens, do not attempt
to operate the switches until the condensation has disappeared.
l If juice or similar liquid is spilled on the display, wipe off
immediately. Failure to do so may result in product malfunction.
l The screen is easily marked by fingerprints and tends to attract
dust, and should therefore be cleaned occasionally. When
cleaning, turn off the power, and wipe lightly with a soft, dry cloth.
To remove dirt, soak a soft cloth in neutral detergent and squeeze
well before wiping. Do not use a wet floor-cloth, organic solvents
(benzene, ethanol, thinner, etc.), acids, or alkalis. Using such
agents will result in screen deterioration. Furthermore, do not hit
the screen or rub it with hard objects.
INTRODUCTION
7