Subaru STARLINK Manual page 187

DOWNLOAD MAP UPDATE DATA TO A SMARTPHONE
1.
Connect a smartphone to the system via Bluetooth.
● When using an iPhone, it can also be connected using a
USB cable.
2.
Start the SUBARU STARLINK application on the smartphone
and download the map update data.
INSTALL MAP UPDATE DATA
1.
Connect a smartphone to the system via Bluetooth.
● When using an iPhone, it can also be connected using a
USB cable.
2.
Update Now
Select (Update Now).
● If "Auto Update via Mobile" is enabled, the map update
data will be installed automatically when the smartphone
is connected to the system.
3.
→
Yes (Yes)
4.
After the updates have been completed, turn the ignition
switch to the "LOCK"/"OFF" position and exit the vehicle.
5.
Close the driver's door and lock the doors, then move at
least 10 feet (3 m) away from the vehicle to prevent the key
from interfering.
6.
After at least 5 minutes have elapsed, start the engine
again.
● The new map data will be applied.
NOTE
When downloading map data using the SUBARU STARLINK
l
application, make sure there is sufficient storage space on the
smartphone for the selected region map data.
When using an iPhone to perform an update, connecting the iPhone
l
to the system via USB is recommended. In this case, if a genuine
Apple USB cable is used, high speed communication is possible.
This product uses the smartphone's data plan for features and
l
services. Please consult carrier data plan usage, pricing, data overage
charges, limitations and usage guidelines.
TIPS FOR THE NAVIGATION SYSTEM
187
7