Subaru STARLINK Manual page 66

OTHER SETTINGS
SETTING Wi-Fi® CONNECTION (11.6-inch display
with Navi system only)
CONNECTING TO A Wi-Fi® NETWORK
1.
Display the general settings screen. (→P.64)
2.
Select (Wi-Fi Settings).
3.
→ Available Wi-Fi Networks
4.
Select the desired network.
● When a network with
entry screen is displayed, enter the password, and then
OK
select (OK).
66
(Available Wi-Fi Networks)
is selected and the password
SETTING UP A CONNECTION QUICKLY
If a Wi-Fi® device is Wi-Fi® Protected Setup compatible, it can be
connected to more quickly.
1.
Display the general settings screen. (→P.64)
2.
Select (Wi-Fi Settings).
3.
→ Wi-Fi Protected Setup
4.
PIN Setup
Select (PIN Setup) or
(Push Button Setup) as determined by the device.
5.
Operate the Wi-Fi® device to connect.
● When PIN Setup
(PIN Setup) is selected: Enter the
displayed PIN code into the Wi-Fi® network device.
● When
Push Button Setup
selected: Push the WPS button on the Wi-Fi® network
device.
(Wi-Fi Protected Setup)
Push Button Setup
(Push Button Setup) is