Subaru STARLINK Manual page 184

TIPS FOR THE NAVIGATION SYSTEM
NOTE
Map update using Wi-Fi® or a smartphone may not be available in
l
some countries.
For the best possible navigation experience, regularly update
l
maps for all frequented regions, including nearby states. Failure to
update maps for surrounding states may result in inaccurate map
information during interstate travel. Updates made using a USB
memory device will update map information for all states. Please visit
Subaru.com for more information and the latest updates.
If the map update fails or cannot be performed when using Wi-Fi®
l
or a connected smartphone, check the communication status of
the connected device. If there is a problem with communication,
perform the procedure again using a different Wi-Fi® access point or
smartphone.
If the map update procedure fails, refer to the "TROUBLESHOOTING"
l
section. (→P.211)
Subaru may terminate or suspend your access to all or part of these
l
services for any or no reason, including without limitation, any violation
of the terms detailed at:
https://subaru-maps.com/#/termsofuse
184
UPDATING THE MAP DATA MANUALLY USING A
USB MEMORY DEVICE
Maps can be updated using a USB memory device.
For details and to download update data, refer to the following
URL:
https://subaru-maps.com/
1.
Connect to a USB memory device. (→P.45)
2.
Select (Map Update) on the navigation
settings screen. (→P.179)
3.
→ USB
(USB)
4.
After the updates have been completed, turn the ignition
switch to the "LOCK"/"OFF" position and exit the vehicle.
5.
Close the driver's door and lock the doors, then move at
least 10 feet (3 m) away from the vehicle to prevent the key
from interfering.
6.
After at least 5 minutes have elapsed, start the engine
again.
● The new map data will be applied.