Table of Contents
Advertisement
When the Ready LED is on (4/4)
LED Display
Tray 2 No Cassette/
No Tray 2
Tray 3 No Cassette/
No Tray 3
Duplex Unit Not Available
Description
The cassette for Tray
2 is not in place.
A print job was sent
using the Tray 2 set-
ting in the printer
driver, even though
Tray 2 is not
installed on the
printer.
The cassette for Tray
3 is not in place.
A print job was sent
using the Tray 3 set-
ting in the printer
driver, even though
Tray 3 is not
installed on the
printer.
A duplex print job
has been sent to a
printer that is not
equipped with a
duplex unit.
Messages
Response Required
Check the trays to
make sure that all
cassettes are
securely in place.
p. 2-22
Change the Paper
Source setting in the
printer driver and
resend the print job.
p. 4-51
Check the trays to
make sure that all
cassettes are
securely in place.
p. 2-22
Change the Paper
Source setting in the
printer driver and
resend the print job.
p. 4-51
Disable the duplex
setting and resend
the print job.
For details, see
"Chapter 4 Printer
Driver and Status
Display".
pp. 4-56, 4-59
6-19
Advertisement
Table of Contents
