Table of Contents
Advertisement
Changing Cartridges
Note
4-21
• Do not touch the oiling roller
as its surface is covered with
silicone oil.
19. Tighten both of the oiling
roller's installation screws.
Screws
Gently press down on the
green tab while tightening
the screws of the oiling roller.
Tighten the screws so that the
Green tab
spring action of the cover is
completely closed.
20. Holding the lock release
lever, insert the fusing unit
until it clicks into place.
Advertisement
Table of Contents
Troubleshooting
