Konica Minolta PagePro 9100 User Manual page 143

12
Thread one end of the strapping beneath the
carton.
13
Pull the two ends of the strapping together at
the top of the carton.
14
Thread both ends up through the
center of the buckle.
15
Weave the slack of one
end through the buckle.
16
Pull the slack on that end
so that the strapping is
taut in the buckle.
17
Weave the slack of the
other end through the
buckle.
18
Pull all of the
remaining slack
of the strapping
through this side
of the buckle,
until the buckle is
taut against the carton.
19
Pull the buckle against the carton as tightly as possible.
Some slack may still exist.
Repacking the Printer
137