Konica Minolta PagePro 9100 User Manual page 50

6
Insert the right end of the paper
retainer
size of paper to be loaded
The paper size is detected
depending on the position of
the paper retainer. Correctly
position the paper retainer
according to the size of paper
to be loaded.
7
Slide the paper retainer to the
left , and then press down on
the gray lever
paper retainer.
Attention
Make sure the paper retainer is
seated properly.
8
Align the four edges of the paper,
and then load the paper printing
side up.
Do not load media on this side.
Long-edge Feed Examples
A4, B5, Government
Letter, and Letter
A maximum of 500 sheets (20 lb bond [75 g/m
loaded. If media is loaded past the triangular mark, it may not be fed
correctly.
44
into the slot for the
to secure the
.
Short-edge Feed Examples
A3, B4, and Ledger
2
2
1
] plain paper) can be
Loading Media