Formula MOD Operating Manual page 7

1.2 Installing shock on a MTB frame:
ATTENTION: Suspension setting should be different between different bi-
cycle manufacturer. All maintenance operations must be carried out solely by
personnel authorized by FORMULA S.a.S.
FORMULA assumes no responsibility for breakages and damage to people and / or
things due to this non-compatibility. The result of such non-compliance can lead
to DEATH. Contact the FORMULA Dealer and don't use the shock.
WARNING: FORMULA recommend DO
NOT INSTALL THE SHOCK on frame
with the eyelets as showed in figure on
the left. The axes of the eyelets MUST
BE perpendicular to the same plane as
showed in figure on the right.
FORMULA assumes no responsibility for
breakages and damage to people and / or
things due to non-compliance. This is valid
until further notice.
7