Daikin EWAA004D2V3P-H Operation Manual page 13
Packaged air-cooled water chillers and packaged air to water heat pumps
Hide thumbs
Also See for EWAA004D2V3P-H:
- User reference manual (60 pages) ,
- Installation manual (44 pages) ,
- Installer's reference manual (236 pages)
Table of Contents
Advertisement
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Prerequisite: The room temperature schedule is only available if
room thermostat control is active. If leaving water temperature
control is active, you can program the main zone schedule instead.
1 Go to the schedule.
2 (optional) Clear the content of the whole week schedule or the
content of a selected day schedule.
3 Program the schedule for Monday.
4 Copy the schedule to the other weekdays.
5 Program the schedule for Saturday and copy it to Sunday.
6 Give the schedule a name.
To go to the schedule
1 Go to [1.1]: Room > Schedule.
2 Set scheduling to Yes.
3 Go to [1.3]: Room > Cooling schedule
To clear the content of the week schedule
1 Select the name of the current schedule.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Delete.
Delete
Rename
Select
3 Select OK to confirm.
To clear the content of a day schedule
1 Select the day of which you want to clear the
content. For example Friday
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Delete.
Delete
Edit
Copy
3 Select OK to confirm.
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688015-1C – 2022.09
C
To program the schedule for Monday
1 Select Monday.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Edit.
Delete
Edit
Copy
3 Use the left dial to select an entry and edit the entry
with the right dial. You can program up to 6 actions
each day. On the bar, a high temperature has a
darker colour than a low temperature.
Mon
0
12
24
6:00
22°C
22:00
20°C
8:30
26°C
--:--
--
17:30
22°C
Note: To clear an action, set its time as the time of
the previous action.
4 Confirm the changes.
Result: The schedule for Monday is defined. The
value of the last action is valid until the next
programmed action. In this example, Monday is the
first day you programmed. Thus, the last
programmed action is valid up to the first action of
next Monday.
To copy the schedule to the other weekdays
1 Select Monday.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
2 Select Copy.
Delete
Edit
Copy
Result: Next to the copied day, "C" is displayed.
3 Select Tuesday.
User defined 1
Mon
Tue
Wed
Thu
Fri
Sat
Sun
5 Operation
C
Operation manual
13
Advertisement
Table of Contents
