Rear Panel I/O Ports; 2-Pin Terminal Block (Dc 12V) - DFI AL051 User Manual

Rear Panel I/O Ports

2-Pin
+
Terminal
Block
-
(DC 12V)
Mini DP++
USB 3.1 Gen 1 LAN 1
The rear panel I/O consists of the following ports:
• 1 2-pin terminal block (DC 12V)
• 1 Mini DP++ port
• 2 USB 3.1 Gen 1 ports
• 2 GbE (RJ-45)
• 1 VGA port
Chapter 2 Hardware Installation
Chapter 2
VGA
LAN 2
15

2-Pin Terminal Block (DC 12V)

2-Pin Terminal Block (DC 12V)
- +
This 2-pin terminal block is considered a low power solution. Connect a power adapter and a
2-pole terminal to DC Jack cable to this terminal block. Using a voltage more than the recom-
mended range may fail to boot the system or cause damage to the system board.
www.dfi.com