Graphics Interfaces; Rj45 Lan Ports - DFI AL051 User Manual

Graphics Interfaces

The display ports consist of the following:
• 1 Mini DP++ port
• 1 VGA port
Mini DP++
VGA
Mini DP++ Port
The Mini DP++ port is a digital display interface used to connect a display device such as a
computer monitor. It is used to transmit audio and video simultaneously. The interface, which
is developed by VESA, delivers higher performance features than any other digital interfaces.
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port,
gently tighten the cable screws to hold the connector in place.
Driver Installation
Install the graphics driver. Refer to Chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2

RJ45 LAN Ports

LAN 1
LAN 2
Features
• 2 Intel I211AT PCI Express Gigabit Ethernet controllers or 2 optional Intel
®
Express Gigabit Ethernet controllers
The LAN ports enable the system board to connect to a local area network by means of a net-
work hub.
BIOS Setting
Configure the onboard LAN in the "ACPI Configuration" submenu of the Advanced menu in the
BIOS. Refer to Chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to Chapter 4 for more information.
16
I210IT PCI
®
www.dfi.com