This message...
MANUAL FEED
"SIZE"
"MEDIA"
MEMORY FULL
PRESS CANCEL
OUTPUT FULL
REMOVE PAPER
YYYY
PAPER EMPTY
"SIZE"
"MEDIA"
PAPER ERROR
"SIZE"
"MEDIA"
Status, Error, and Service Messages
means...
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
The printer has
received more data
than can be pro-
cessed with its inter-
nal memory.
The output tray is full
of media.
The specified tray is
empty. (Appears
PAPER
when
MENU/PAPER
SOURCE/TRAY
CHAINING ON
is
set.)
The media size/type
set in the printer
driver is different from
the size/type of media
loaded (Appears
PAPER
when
MENU/PAPER
SOURCE/TRAY
CHAINING ON
is
set.)
do this...
Press the
key to
print, or remove and
reload the media in Tray
1.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed (for
example, by decreasing
the resolution), and then
try printing again.
If that doesn't solve the
problem, install an
optional memory mod-
ule.
Remove all media from
the output tray.
Load the correct media
into the specified tray.
Load the correct media
size and type.
243