Solving Problems With Media Misfeeds - Konica Minolta Magicolor 5650EN User Manual

Konica minolta magicolor 5650en: user guide
Hide thumbs Also See for Magicolor 5650EN:
Table of Contents

Advertisement

Solving Problems with Media Misfeeds

Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you're
using unsupported print media.
Symptom
Several
sheets go
through the
printer
together.
Media mis-
feed mes-
sage stays
on.
Duplex
option mis-
feeds.
Solving Problems with Media Misfeeds
Cause
The front edges of
the media are not
even.
The media is moist
from humidity.
Too much static elec-
tricity is present.
Right side cover
needs to be opened
and closed again to
reset the printer.
Some media remains
misfed in the printer.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media is still being
misfed.
Solution
Remove the media and even up the
front edges, then reload it.
Remove the moist media and replace it
with new, dry media.
Do not fan transparencies.
Open and close the right side cover of
the printer again.
Recheck the media path and make
sure that you have removed all of the
misfed media.
Use KONICA MINOLTA approved
media. See "Media Specifications" on
page 108.
Only plain paper, 60–90 g/m
lb) can be autoduplexed. See "Media
Specifications" on page 108.
Make sure that you have not mixed
media types in Tray 1.
Do not duplex (double-sided) enve-
lopes, labels, thick stock, glossy, or
transparencies.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
2
(16–24
221

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magicolor 5670enA0ea012

Table of Contents