Konica Minolta Magicolor 5650EN User Manual page 240

Symptom
Printing
takes too
much time.
Blank pages
come out
during print-
ing.
226
Cause
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
The printer is set to
Energy Saver mode.
The job is very com-
plex.
The printer memory is
insufficient.
A toner cartridge for a
different region or an
unapproved genuine
toner cartridge is
installed ( INCOR-
RECT TONER X
displayed in the mes-
sage window).
One or more of the
toner cartridges are
defective or empty.
The wrong media is
being used.
Solution
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
Energy Saver mode. If you do not want
to use this mode, disable it. (
DEFAULT MENU/ENERGY SAVER
menu)
Wait. No action needed.
Add more memory.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
is
Check the toner cartridges. The image
will not print if one or more cartridges
are empty.
Check that the media type set in the
driver matches the media loaded in the
printer.
Solving Other Problems
SYS