Konica Minolta Magicolor 5650EN User Manual page 247

Symptom
The print or
color density
is uneven.
Irregular
print or mot-
tled image
appears.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
Solving Problems with Printing Quality
Cause
One or more of the
toner cartridges may
be defective or low.
The printer is not
level.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
One or more of the
print units may be
defective.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media type is set
incorrectly.
The levers on the
fuser unit are set to
the position for
envelopes.
Solution
Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
Place the printer on a flat, hard, level
surface.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA approved
media. See "Media Specifications" on
page 108.
Remove the print units and check it for
damage. If it is damaged, replace it.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA approved
media. See "Media Specifications" on
page 108.
When printing envelopes, labels, post-
cards, thick stock, glossy, or transpar-
encies, specify the appropriate media
type in the printer driver.
Before printing on media other than
envelopes, be sure to return the levers
on the fuser unit to the setting for plain
paper.
233