VWR SAS Super IAQ Instruction Manual page 14

'LANGUAGE'
Menu text may be selected by choosing from different languages.
From the UTILITY MODE select 'LANGUAGE':
Press 'ENTER' to list all the available languages:
Use the "Up" or "Down" arrows to select the desired language and press 'ENTER' to confirm.
There are six available languages:
English, German, Spanish, French, Italian and Portuguese.
'IDENTIFY'
This option is used to identify the operator. This should be changed if different operators use the sampler and
especially if the data is to be printed.
From the UTILITY MODE select 'IDENTIFY'.
Press 'ENTER' to modify identification code:
Select the desired character using the "Up" or "Down" arrows and confirm with 'ENTER'.
Select the next desired characters and confirm them by pressing 'ENTER'.
The selected values are stored in the memory and will be kept even after the instrument has been switched off.
'SAMPLING SITE'
Site identification should be changed for samples taken at different sites, especially if the results are to be printed.
14