Table of Contents
Advertisement
Network Configuration
Registration
(Color printers only)
Calibration
CMM Profile
(Color printers only)
Header
Trailer
4
The network configuration page gives full information of the
network interface setup. Up to two network interfaces may be
installed (one is standard and one is optional) in a Crown II
Print System and each network interface has its own network
configuration page.
This page shows the registration of the four colors of a Crown
II color printer in respect to each other.
This page is used to verify the adjustment for the amount of
toner (density) of the engine for calibration purposes.
CMM (Color Management Module) – This page gives
information about all ICC profiles and color device links.
A header page is a job separator page that can be enabled to
print prior to a print job. It may give information about the
printer language, the user, the document name, the interface,
and the start print time. It is possible to specify the media bin
for the header page, so you may use a different media type
than is used for the rest of the print job.
A trailer page is similar to a header page, but it prints after a
print job and gives information, such as total number of pages
in the print job (including a header page but excluding the
trailer page) and how long the job took to print. Also the
media bin for this page can be specified, as with the header
page.
Part 1
Crown Book
Advertisement
Table of Contents
