QMS Crownnet Setup Manual page 41

Follow the appropriate procedure below to install a QMS CrownNet
printer port as a Windows port and to connect it to a printer driver.
The procedure you use depends on the version of Windows you're
running.
» Note: You must have the QMS CrownNet Print Utility software
installed before completing these procedures.
Note: Windows 3.1 requires OS/2 LAN Server/LAN Manager
»
Workstation Service. Windows for Workgroups 3.11 requires
Microsoft Windows Network (Microsoft NetBEUI protocol). Refer to
your Windows documentation for installation instructions.
1 Double-click the CrownNet Print Utility icon to start the util-
ity.
2 In the Port menu, choose Add.
3 In the CrownNet Port list, select the CrownNet port you want
to install.
The ports appear as an alphanumeric list of printers attached to
the network. The names of these printers are defined in the
Administration/Communications/ xxxxxxxx NIC/CrownNet/Lan
Manager/Printer Name menu (where xxxxxxxx is either Resident
or Optional), and are listed on the CrownNet configuration page
(Administration/Communications/ xxxxxxxx NIC/CrownNet/
Common/Config Page menu (where xxxxxxxx is either Resident
or Optional)). The factory default name for each printer is
QMS_080086 xxxxxx , where xxxxxx is a unique number assigned
by QMS. (Refer to the "Configuring the OS/2 LAN Manager/LAN
Server or Microsoft Windows Network Protocol" section of
chapter 2, "Printer Configuration," for instructions on changing the