Installing The Unix Host Software - QMS Crownnet Setup Manual

5 Change to the location in which you want the CrownAdmin 3
directory to be created.
» Note: The directory in which crnadm.exe resides must be able to
be mounted by all network nodes that need to access the printer.
6 Extract the files from the CD-ROM.
For example:
tar xvf /cdrom/platform/unix/crnadm/solaris/
solaris.tar
This creates a crnadm directory containing CrownAdmin 3.
» Note: See the main readme file on the CD-ROM for the exact
location of this file.
7 Unmount the CD-ROM file system:
umount device_filename
For device_filename , substitute the complete pathname of the
device file associated with the CD-ROM drive.
8 Add the name of the directory containing crnadm (the direc-
tory in which you extracted the solaris.tar file) to your path.
9 Install the UNIX Host Software, following the instructions in
"Installing the UNIX Host Software" on page 30.
CrownAdmin 3 for SunOS is a software utility that allows you to mon-
itor and configure QMS printers and perform network operations on
printers connected to your network.
1 Insert the CD-ROM in your CD-ROM drive.
» Note: Some drives require that the disk be placed in a caddy
before being inserted in the drive. Check your CD-ROM drive
documentation for information.
2 Log on the UNIX system as root.