QMS Crownnet Setup Manual page 34

16 Follow the instructions on the screen.
See chapter 7, "UNIX Utilities" in the QMS CrownNet System
Administrator's Guide for more information.
17 Go to "Interface Configuration" on page 32.
This section briefly describes the configuration procedure for the
printer interface. For an overview of menus and options see "Crown-
Net Menus" on page 68. For a complete discussion of all of the con-
figuration options available through the Administration/
Communications/ xxxxxxxx NIC/CrownNet menu (where xxxxxxxx is
either Resident or Optional), see chapter 2, "Interface Configuration,"
of the QMS CrownNet System Administrator's Guide .
You can make these configuration changes through any of the follow-
ing means:
n
Printer Control Panel—For information on using the printer con-
trol panel to change configuration menu settings, refer to your
printer documentation.
n
CrownAdmin (for DOS), CrownAdmin 3 (for AIX, HP-UX, Mac-
intosh, OS/2, Solaris/SunOS, and Windows/Windows NT/
Windows for Workgroups), or CrownNet Manager (for OS/
2)—For more information on using this software, refer to the
appropriate chapter in the system administrator's guide or to the
software's on-line help.
n
Remote Console—For information on accessing Remote Con-
sole, refer to the appropriate chapter in the system administra-
tor's guide. For information on using Remote Console, refer to the
QMS Crown Remote Console User's Guide .