Network Connection; Ethernet Network Connection - QMS Crownnet Setup Manual

—
1 If necessary, install the CrownNet interface card.
This might not be necessary because some printers ship
standard with an Ethernet network interface. Check the printer
documentation if you're not sure.
For instructions on installing a CrownNet interface card, refer to
the "Printer Options" chapter or the Options manual of your
printer documentation.
2 Connect the printer to the network.
If you use...
Ethernet
Token-Ring
3 Install the appropriate CrownNet software.
If you use this
operating
system...
AIX
DOS
HP-UX
Macintosh
Follow these instructions...
"Ethernet Network Connection" on page 12.
"Token-Ring Network Connection" on page 15.
Install this software
(on the CD-ROM)...
CrownAdmin 3
UNIX Host Software
CrownAdmin
CrownAdmin 3
UNIX Host Software
CrownAdmin 3
Following these
instructions*...
"Installing CrownAdmin 3 for
AIX" on page 17
"Installing the UNIX Host
Software" on page 30
"Installing CrownAdmin for
DOS" on page 18
"Installing CrownAdmin 3 for
HP-UX" on page 19
"Installing the UNIX Host
Software" on page 30
"Installing CrownAdmin 3 for
Macintosh" on page 20