Interface Configuration - QMS Crownnet Setup Manual

4 Follow the instructions on the screen. You will be asked for
the following information:
n
Destination drive and subdirectory for the program files (the
default is C:\CROWNPUW).
n
Destination drive and subdirectory for the spool directory (the
default is C:\~).
The spool directory is the directory in which Windows print
files are stored prior to redirection to the CrownNet Print Util-
ity interface. Ensure that the hard disk containing the spool
directory has ample space available to hold spool files. At
least 10 MB free space is recommended.
5 When the installation is complete, you are prompted to exit
from the installation program and return to Program
Manager. Choose OK.
6 Since the CrownNet Print Utility must be running when you
print to a CrownNet port, we strongly recommend that you
place the CrownNet Print Utility (CROWNPUW.EXE) into your
Startup folder.
7 Go to "Interface Configuration" on page 32.
» Note: For installation instructions for the QMS Network Print
Monitor, see the Administrator's Guide. The QMS Network Print
Monitor for Windows 95 Administrator's Guide and the QMS Print
Monitor Administrators Guide for Windows NT are included on the
QMS Software Utilities CD-ROM.