Download Print this page

QMS 2001 Setup Manual page 6

Konica minolta 2001: setup guide

Advertisement

The QMS 2001 Knowledge System should be located
Away from cooling sources, heating sources,
extreme temperature changes, and direct sunlight...
Away from excessive dust, corrosive chemicals or
vapors, any strong electromagnetic field (such as
that created by an air conditioner), and excessive
vibration...
On a level surface (within .08"/2 mm from front to
rear and left to right) capable of supporting 48 lb/21
kg...
So there is enough space for users to access all
sides of the system. (The 2001 measures 27.6"/702
mm wide by 26.9"/684 mm deep.)
Caution: The belt inside the PCU is sensitive to bright light and
scratches. Don't remove the PCU from its protective bag until you
are ready to install it, and then hold it only by the handles as
shown in step 3.
1
Open the printer cover.
5
...

Advertisement

loading

This manual is also suitable for:

2001 knowledge system