Table of Contents
Advertisement
7
Press the Back key.
To delete another destination, repeat the procedure from step 5.
8
Press the + or , key to select
The destination is deleted from the favorite list.
To return to the Fax mode screen, continue pressing the Back key
until the Fax mode screen appears, or press the Stop/Reset key.
Speed Dialing
Registering a Speed Dial Destination
Frequently specified fax numbers (maximum of 220) can be registered as
speed dial destinations. In addition, batch transmission settings can be spec-
ified.
1
Press the + or , key to select UTILITY, and then press the Select key.
For details on selecting a menu, refer to "General Procedure for Spec-
ifying Settings in Utility Menu" on page 2-30.
2
Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3
Press the + or , key to select SPEED DIAL, and then press the Select
key.
The SPEED DIAL screen appears.
4
Use the keypad to type in the speed dial number (1-220), and then press
the Select key.
If LDAP search settings have been specified, a screen allowing MAN-
UAL SETTING or LDAP SEARCH to be selected appears after the
Select key is pressed. Select
the Select key
For details on entering/editing numbers, refer to "Entering Text" on
page A-3.
If the destination is already registered with the specified speed dial
number, REGISTERED! appears. Press the Back key to return to the
DIAL REGISTER screen, and then continue with step 3.
5
Enter the name of the speed dial destination to be registered, and then
press the Select key.
Text up to 20 characters long can be entered for the name.
6-4
, and then press the Select key.
FINISH
MANUAL SETTING
, and then press
Speed Dialing
Advertisement
Table of Contents
