Before Operating; Unpacking & Transportation - Wen MM0713 Instruction Manual

WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the miter saw from the packaging. Make sure to take
out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list
below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our
customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
PACKING LIST
Components
Accessories & Tools
Wood Clamp (1)
TRANSPORTING
Before transporting your miter saw, make sure saw arm is locked down, the miter table is locked in position and
the slide lock knob is tightened. Only lift the saw by the carrying handle located on top of the motor housing. Do
not lift the saw using the guards or the operating handle.
UNPACKING & TRANSPORTATION
Extension Arms (2)
Miter Lock Handle (1)
Miter Saw (1)
Dust Bag (1)
Head Screw (1)
M5x25 Socket
Head Screw (1)
6mm Hex
Wrench (1) Carrying Handle (1)
M5x55 Socket
5mm Hex
Wrench (1)
9