Before Getting Started; Items Required For The Installation - Creo Valeo 17Wi Installation Manual

44

Before Getting Started

Items Required for the Installation

Kit Contents
Leaf Valeo digital camera back with Hasselblad mount
FireWire cable (4.5 m / 15 ft.)
Mamiya RZ67 adaptor plate*
Focusing screen mask*
Leaf DM FireWire cable (25 cm / 10 in.)
Leaf Capture V8 software CD
Documentation (Leaf documentation CD and printed documentation) Yes
Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers)
Diffusion filter
Gray card (18%)
This chapter describes the Leaf Valeo digital camera back installation as it
applies to the Mamiya RZ67 camera.
The following table describes the items you need to install the Leaf Valeo
digital camera back on a Mamiya RZ67 camera. The items can be found in
the Leaf Valeo with Hasselblad Mount Kit and in the Mamiya RZ Interface
Kit.
Important: To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
* available in the Mamiya RZ Interface Kit
Note: The Hand Release cable and the Camera Control cable are only supplied
in the Mamiya RZ Interface Kit for Valeo 6. The Camera Control cable is sold
separately for other Leaf Valeo digital camera backs.
Chapter 7 – Mamiya RZ67
Required for
Installation
Yes
Yes
Yes
Yes
Yes
Yes
(keep on hand)
No
No