Creo Valeo 17Wi Installation Manual page 117

68
Attach the Leaf Valeo digital camera back to the Graflock adaptor.
5.
Attach the Lens Control flex holder to the tripod.
6.
Attach the Rollei Lens Control to the flex holder.
7.
Connect the cable of the Rollei Lens Control to the Rollei electronic
8.
shutter cable.
Connect the Rollei Lens Control power interface battery to the Rollei
9.
Lens Control.
Insert the AC adaptor into the input on the Rollei Lens Control power
10.
interface and connect the other end of the power supply cable to the
power outlet.
Connect one end of the Rollei-Valeo Lens Control interface cable to
11.
the B port of the Rollei Lens Control and the other end to the Camera
Control jack of the Leaf digital camera back.
Insert one end of the Camera-to-Sync cable into the Rollei Lens
12.
Control Sync jack and the other end into the Camera-to-Back Sync
jack of the Leaf digital camera back.
Install the Leaf Capture V8 application from the CD.
13.
Insert the Live Video View software access key into the USB port of
14.
the computer.
Start the Leaf Capture V8 application.
15.
Connect the FireWire cable between the computer and the Leaf digital
16.
camera back.
After you connect the cable, the application automatically connects to
the Leaf digital camera back. When the connection is established, the
LED indicator on the Leaf digital camera back turns from orange to
green.
Notes:
If you want to work with an external flash, connect the Flash Sync cable between
the Leaf digital camera back and the flash or strobe unit.
For information about connecting the FireWire cable, see
Connecting the FireWire Cable.
Chapter 9 – Large Format
Chapter 2,